Cement Testing Equipment

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

The Flexure Strength Testing Machines are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is provided for testing different size of beams. The load is indicated on a calibrated bourdon tube type load gauge of range : 0 -100kNx0.5kN The load gauge is calibrated against National Physical Laboratory I National Council for Cement and Building Materials certified proving ring.

 

Models available:

 

Flexure Testing Machine Hand Operated, Capacity 100 kN (AIM331) 

Flexure Testing Machine for Timber – Digital Capacity 200kN Sample size 200mm x 200 mm x upto 4.8m length  (AIM331-DG-1)

Flexure Testing Machine Electrically Operated, Capacity 100 kN (AIM332 )

Digital Flexure Testing Machine, Capacity 100 kN (AIM 332E-DG-1 )

MU Flexure Testing Machine with automatic pace rate controller, Capacity 100 kN (AIM 332E-MU-1)

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

The flow table apparatus shall be constructed in accordance with Fig. 1A and 1B. Flow table top shall be constructed from a flat metal plate of minimum thickness 1.5 mm. The top shall have a plan area of 700 mm × 700 mm and a flatness of within 1.5 mm. The centre of the table shall be scribed with a cross, the lines of which run parallel to and out to the edges of the plate, and with a central circle 200 mm in diameter. The under surface of the plate shall be reinforced in order to prevent distortion of the flat surface. The front of the flow table top shall be provided with a lifting handle. The total mass of the flow table top shall be 16 ± 1 kg.

The flow table top shall be hinged to a base frame using externally mounted hinges in such a way that no aggregate can become trapped easily between the hinges or hinged surfaces. The front of the base frame shall extend a minimum 120 mm beyond the flow table top in order to provide a top board. An upper stop similar to that shown in Fig. 1A shall be provided on each side of the table so that the lower front edge of the table can only be lifted 40 ± 1 mm.The lower front edge of the flow table top shall be provided with two hard rigid stops which transfer the load to the base frame. The base frame shall be so constructed that this load is then transferred directly to the surface on which the flow table is placed so that there is minimal tendance for the flow table top to bounce when allowed to fall.

C-1.4.1 Mould

The mould is made of a metal readily not attacked by cement paste or liable to rust and of minimum thickness 1.5 mm. The interior of the mould shall be smooth and free from projections, such as protruding rivets, and shall be free from dents. The mould shall be in the form of a hollow frustrum of a cone having the internal dimensions as shown in Fig. 2. The base and the top shall be open and parallel to each other and at right angles to the axis of the cone. The mould shall be provided with two metal foot pieces at the bottom and two handles above them.

C-1.4.2 Tamping Bar

The tamping bar shall be made of a suitable hardwood and having dimensions

Approx. Rs 60,000 / PieceGet Latest Price

Product Details:

Product DescriptionFrom the years of commencement, we are engaged in offering a huge assortment of quality approved Lab Mixer. This Lab Mixer is known for its excellent quality and is developed using advanced technology.

Approx. Rs 60,000 / PieceGet Latest Price

Product Details:

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest 2016 Guidelines published by SEFA.

Weight: 

 

• 20 - 35 Kg