• +(91) 82751 76605
  • Email


Dynamics of Machine Lab. Equipments

  • You Are Here :
  • Home
  • >> Dynamics of Machine Lab. Equipments
Turn Table
Request A Quote

Turn Table Apparatus :

The set-up is solely designed & developed for the students of Mechanical Engg., to experimentally determine the Moment of Inertia of a Disk & Ring in rotational motion.
For different masses the MI is determined experimentally and compared with theoretical values of MI of the disk & ring

Space Required : 1.5m. x 1m.

Balancing of Reciprocating Masses
Request A Quote

Balancing of Reciprocating Masses :

This set-up enables one to study and analyse the balance & unbalance of the reciprocating masses. In this a four cylinder in-line engine type model is used. An arrrangement is provided to change the crank angle.

Space Required : 2.5m x 1.5m.

Epicyclic Gear Train & Holding Torque Apparatus
Request A Quote

Epicyclic Gear Train & Holding Torque Apparatus :

  • To measure epicyclic gear ratio between input shart and output shaft.
  • To measure epicyclic gear ratio between input shaft and holding drum.
  • To measure input torque, holding torque and output torque.
  • Coriolli's Component of Acceleration Apparatus :

    It is designed to study & determine Coriollis Component of Acceleration of a slider crank mechanism, theoretically and experimentally.

    Space Required : 1.5m. x 1.5m.

    Turn Table
    Request A Quote

    Vibrating Platform :

    This Vibrating Table is a Single Axis table with vertical vibrations only. In this table the principle of variable frequency and variable amplitude is used.

    With the help of Vibrometer/Accelometer one can observe and note down the vibration acceleration and vibration velocity. It is essentially a sinusoidal waveform generator with the help of mechanical eccentric arrangement rotated with the help of 2 H.P. AC Motor.

    Cam Analysis Machine
    Request A Quote

    Cam Analysis Machine :

    With the help of combination of provided cams and followers following experiments can be conducted. 

    • Plotting and Analysing of the X – q curve.
    • The velocities and accelerations of the follower can be derived and hence inertia forces are plotted over the whole lift period.  The condition of follower bounce can clearly be shown by carrying out theoretical calculations and graphs from   X – q curve.
    • The follower bounce can be observed by using a stroboscope (Not in scope of supply).
    • The tests can be repeated by changing compression springs, follower weights and cam  speed. 
    Typical Test Results   :  Jump speed decreases with increase in follower wts.
    Whirling of Shafts Apparatus
    Request A Quote

    Whirling of Shafts Apparatus :

    Display of the various modes of whirl for a range of shafts with

  • Both ends directionally free.
  • One end Fixed and the other free.

  • Turn Table
    Request A Quote

    Universal Vib-Lab. (For Conducting 11 experiments) :

    VIB-LAB. , is useful to study various experiments and to verify the principles and relations pertaining to study of vibrations. In this apparatus frame and stand made out of thick M.S.channels are provided for conducting various experiments related to vibration. While designing special care is taken for quick and easy assembly and dismantling of experimental set-ups. Digital RPM Indicator is provided for measuring speed of the exciter unit.

    Slip & Creep Meas. App.

    Slip & Creep Meas. Apparatus
    Request A Quote

    Motorised Gyroscope

    Motorised Gyroscope
    Request A Quote

    Cam Analysis Apparatus

    Cam Analysis Apparatus
    Request A Quote

    Forced Vibrations App.

    Forced Vibrations Apparatus
    Request A Quote

    Universal Governor App.

    Universal Governor App.
    Request A Quote